|
|
|
Long and powerful the Park 12 Inch Adjustable Wrench is forged from carbon steel for strength and chrome plated for a durable finish - A vinyl dipped handle adds comfort - Jaws open up to 36 mm to allow use with a whole variety of Park Tool freewheel
|
|
£29.99
More Information
Visit Store
|
|
|
|
The Park 8 Noth BB Tool is a heavy duty investment cast tool for installing and removing all Shimano and ISIS Drive 8-notch bottom bracket cups - Includes 36mm wrench flats.
|
|
£16.99
More Information
Visit Store
|
|
|
|
Designed specifically for the home mechanic that wants the best the Park Advanced Mechanic Tool Kit is a special 37 piece collection of their finest shop-quality tools all packaged in a tough tool box. The AK-37 includes all the most frequently used
|
|
from £269.99
Compare Prices
|
|
|
|
A post-ride essential and a fun way to work with your favourite toolsStainless steel pedal wrench and cone wrench grilling tools that bring Park Tool Blue to the barbequeAvailable only as a set
|
|
£30.68
More Information
Visit Store
|
|
|
|
The Park BB and Crankarm Tool - Hollowtech 2 is a highly durable metal tool to remove and install Shimano HollowTech II integrated Bottom brackets and chainsets - 16 Laser cut splines securely engage the notches of the bottom bracket cups while the o
|
|
£19.99
More Information
Visit Store
|
|
|
|
Designed and built to install and remove BB30 bearings (direct-fit, pressed-in bearings and a 30 mm spindle) as well as install the bearings for the BB90 direct fit systemThe BBT-39 set features two different bushing sets to be used inconjunction
|
|
£53.99
More Information
Visit Store
|
|
|
|
Packed with hundreds of photos and hundreds of procedures, the second edition BBB-2 provides both the novice and veteran mechanic the information needed to perform nearly any repair from trailside repairs to complete overhaulsWritten by Park Tool
|
|
£22.79
More Information
Visit Store
|
|
|
|
The Park Bike Cleaning Brush Kit is the perfect collection of brushes for cleaning your bike - Contains 4 brushes each specially designed for a specific cleaning purpose - Double ended GearClean brush for cleaning between rear sprockets - Tyre and fr
|
|
£19.99
More Information
Visit Store
|
|
|
|
A highly durable metal tool to remove and install Shimano HollowTech II integrated Bottom brackets and chainsets16 Laser cut splines securely engage the notches of the bottom bracket cups, while the other end fits the 8 internal splines of the cr
|
|
£21.38
More Information
Visit Store
|
|
|
|
A self-contained set for accurate facing of a Bottom bracket shellSimple to use tool which ensures the seating faces of a bottom bracket shell are parallel, which is essential for the smooth running and long life of Bottom brackets, especiall
|
|
£352.33
More Information
Visit Store
|
|
|
|
A precision tool that provides a piloted means of tapping threads in a Bottom bracket shellIncludes English taps 1.370 inch x 24 tpi right hand thread (for adjustable cup), and 1.370 inch x 24 tpi left hand thread (for fixed cup)Italian thread ta
|
|
£609.74
More Information
Visit Store
|
|
|
|
Installs and removes bottom brackets
|
|
£6.49
More Information
Visit Store
|
|
|
|
The Park Bottom Bracket Tool - 16 Notch Cups is a heavy duty shop quality tool for installing and removing Shimano / Race Face / FSA / Campagnolo and Truvativ sixteen-notch external bearing bottom bracket cups - Made from investment cast steel the BB
|
|
£22.99
More Information
Visit Store
|
|
|
|
The BBT-22 is a shop quality tool for installing and removing Shimano and ISIS Drive splined twenty-tooth bottom bracket cupsMade from investment cast steel, the BBT-22 utilizes a flat tooth profile to ensure maximum engagement with the bottom br
|
|
£16.73
More Information
Visit Store
|
|
|
|
A heavy duty, investment cast tool for installing and removing all Shimano and ISIS Drive eight-notch bottom bracket cupsIncludes 36 mm wrench flatsThe BBT-18 replaces the previous model BBT-8
|
|
£14.97
More Information
Visit Store
|
|
|
|
Tool for removing and fitting 6 notch cups on sealed Bottom bracketsFits cartridge cups used on Sachs and Campagnolo Veloce, Mirage, and AvantiAlso fits Thun SKF Series sealed cartridge bottom bracketsLong vinyl coatedhandle provides leverage
|
|
£9.29
More Information
Visit Store
|
|
|
|
Ride saving essentials in a tight tool roll, perfect for just about any rider. The Park BTR1 - Tool Roll features the essential tools needed to fix a flat and make trail or roadside adjustments all wrapped in a well-organized, protective tool roll. J
|
|
from £49.49
Compare Prices
|
|
|
|
Compact open ended wrenches in the most popular bike sizesHigh strength steel with a nickel plate finishPerfect for use on brakes and gears
|
|
£6.50
More Information
Visit Store
|
|
|
|
Compact open ended wrenches in the most popular bike sizesHigh strength steel with a nickel plate finishPerfect for use on brakes and gears
|
|
£6.50
More Information
Visit Store
|
|
|
|
The Park Campagnolo Bottom Bracket and Cassette Lockring Tool fits Record - Chorus - Athena Cartridge Bottom Brackets - Also used on all Campagnolo cassette lock rings.
|
|
£11.99
More Information
Visit Store
|
|
|
|
Park Cartridge Bottom Bracket Tool is designed for inserting and removing all Shimano cartridge bottom brackets use in conjunction with a large adjustable spanner.
|
|
£16.99
More Information
Visit Store
|
|
|
|
The Park Cassette Remover Hyperglide is made from heat treated alloy tool steel. The one inch base nut ensures sufficient torque can be applied by using either a large adjustable spanner or a bench vice. The thin wall design enables freewheel removal
|
|
£9.99
More Information
Visit Store
|
|
|
|
Use this Park CC2 Chain Wear Checker to gauge how your chain is wearing. A worn chain can damage your whole drivetrain.
|
|
£24.99
More Information
Visit Store
|
|
|
|
Use this Park Chain Wear Indicator to gauge how your chain is wearing. A worn chain can damage your whole drivetrain. This accurately indicates when a chain reaches 1 percent stretch which manufacturers recommend is time to change the chain.
|
|
£9.99
More Information
Visit Store
|
|
|
|
Workshop quality Park Chain Whip for removal and installation of Shimano HG cassettes. Heat treated to prevent bending and flexing and equipped with special hardening pins to keep the chain in place. The comfortable handle grip surrounds a hex shaped
|
|
£24.99
More Information
Visit Store
|
|
|
|
The CNW-2 makes chain ring bolt installation and removal easyIt securely holds the slotted nut to prevent spinning when tightening or loosening the boltDouble-ended to fit most slotted-type nuts
|
|
£4.09
More Information
Visit Store
|
|
|
|
The new Park CM5 Chain Cleaning Kit uses an extra large solvent reservoir and a series of rotating brushes to scrub the chains side plates and clean inside the chains rollers. - To make the Chain Cleaner easy to control and use Park have added a stur
|
|
£27.99
More Information
Visit Store
|
|
|
|
Workshop quality tool for use on all bicycle cables and housings. The Park CN10 Cable Cutters have been specifically designed to cleanly cut, without crushing, all types of bicycle cabling, including hard to cut indexed gear housing. Cold forged, hea
|
|
£36.99
More Information
Visit Store
|
|
|
|
Economical and compact, this version of the BBT-22 tool is perfect for the home mechanicThe BBT-32 installs and removes Shimano and ISIS Drive 20-tooth splined bottom bracket cupsFeatures 32 mm wrench flats
|
|
£13.94
More Information
Visit Store
|
|
|
|
The Park CPC2C Crank Puller is a unique universal design that eliminates the need to have a different puller for each brand of crankset. The long handle provides plenty of leverage. Designed for tapered bottom bracket axles.
|
|
£16.99
More Information
Visit Store
|
|
|
|
A fast and precise way to set fork crown races in placeDoes not impact directly against the bearing raceSupplied with three 1 inch setting rings and three 1-1/8 inch setting ringsSafer and easier to use than traditional slide hammers
|
|
£83.67
More Information
Visit Store
|
|
|
|
The Park CT3 Chain Tool is the standard chain tool for workshop and professional use. Made from investment cast steel for strength and durability. Fine thread and large T-handle gives high leverage, and means easy removal of chain rivets. Includes a
|
|
£32.99
More Information
Visit Store
|
|
|
|
Small size but big function, the Park CT5 Compact Chain Brute is a top quality workshop or trail-side tool. A super tough miniature workshop quality chain removing tool designed for use with all chain types including HG and IG.
|
|
£14.99
More Information
Visit Store
|
|
|
|
Height adjustment from 55-inches to 72-inches (1.4m to 1.8m), allow a comfortable working height for any mechanic even when clamping on the seat post of the bike.Quick-adjusting clamp that fits frame tubes from 7/8" (22mm) to 1 5/8" (41mm
|
|
£242.23
More Information
Visit Store
|
|
|
|
Uses the same clamp as the PRS-2 OS and the PRS-3 OS deluxe workshop standsDesigned to be bench mountedClamp rotates 360 degreesMounts to any flat surface
|
|
£202.50
More Information
Visit Store
|
|
|
|
Uses the same clamp as the PRS-2OS and the PRS-3 OS deluxe oversize workshop standsDesigned to be wall mountedClamp rotates 360 degreesMounts easily to any flat surface wallMounting bolts not included
|
|
£198.00
More Information
Visit Store
|
|
|
|
One size does fit allA full-length frame pump that securely locks into nearly any frameThe PMP-5 quickly adjusts in length (no tools needed) to fit small to large size frames so riders can use one pump for multiple bikesYou willalways find the right
|
|
£25.49
More Information
Visit Store
|
|
|
|
Dial indicator kit that bolts directly on to the DT-3 Rotor Truing Gauge, allowing the user to measure and quantify results with much greater accuracyMeasures to within fractions of a millimetre so truing a bent rotor back into useable shape is a
|
|
£44.01
More Information
Visit Store
|
|
|
|
Ensure your disc brakes function smoothly and accurately by facing the frames mounting tabs to remove paint and metal to create a perfectly flat surfaceThe DT-1 tool creates a surface on the frame parallel with the brake pads and rotor to aid accurat
|
|
£156.64
More Information
Visit Store
|
|
|
|
A versatile digital scale built to accurately weigh bikes, frames, and components. The Park DS1 Digital Scale features a unique hexagonal design enabling the scales to be clamped solidly into a repair stand. Alternatively the scales can be hung from
|
|
£69.99
More Information
Visit Store
|
|
|
|
The Park DT2C Rotor Truing Fork is specially designed and precisely manufactured to gently adjust bent or damaged brake rotors - Each DT-2 features two different slot depths laser cut from high quality stainless steel. Centred handle is vinyl dipped
|
|
£17.99
More Information
Visit Store
|
|
|
|
Designed for the casual cyclist, the economical WTK-1 contains the tools needed for many basic adjustments and repairs at home or on the roadIncludes: 3, 4, 5, 6 mm hex wrenches; tire levers; patch kit; straight blade screwdriver; and
|
|
£11.44
More Information
Visit Store
|
|
|
|
Park Folding Hex Set AWS-10 7 piece hex wrench set.
|
|
£4.99
More Information
Visit Store
|
|
|
|
Also known as a Fourth hand, this tool speeds up work on brake and gear cablesOne hand operation to tighten cables, with a thumb lock to hold the setting, leaving your hands free to tighten nuts and boltsHeat treated steel, with a chr
|
|
£41.39
More Information
Visit Store
|
|
|
|
Improperly aligned frame and fork dropouts can cause bent axles and quick release skewers, as well as tracking and shifting problemsThe FFG-2 quickly determines whether dropouts are aligned and parallelIf an error is detected, long handles an
|
|
£101.02
More Information
Visit Store
|
|
|
|
The Park Freewheel Remover Uniglide is made from heat treated alloy tool steel. The one inch base nut ensures sufficient torque can be applied by using either a large adjustable spanner or a bench vice. The thin wall design enables freewheel removal
|
|
£9.99
More Information
Visit Store
|
|
|
|
The perfect tool to remove stubborn freewheelsLong tubular handle for maximum leverageHex shaped end accepts all Park freewheel remover toolsLocking knob holds freewheel tool securelySuper strong investment cast steel
|
|
£47.90
More Information
Visit Store
|
|
|
|
The PMP-4 dual head mini pump is built like all Park Tool tools - solidAll aluminium barrel construction ensures long life and smooth operationSoft touch grips and a flip-out handle make it easy on the handsThe PMP-4 is Presta and Schrader valve comp
|
|
£19.54
More Information
Visit Store
|
|
|
|
The handlebar holder is designed to prevent the handlebar and front wheel from rotating when a bike is mounted in a Park Tool repair standFits handlebars with a diameter up to 32mm and oversized top tubes up to 50mmHBH-2 works on almost any road or m
|
|
£17.57
More Information
Visit Store
|
|
|
|
Park Headset Remover: The professional way to remove headset cups - Pulls through headtube until the flared end snaps open behind the headset cup - Simply hammer out the cup safely and neatly - Fits up to 1-1/4 inch headtubes and headset cups - Heat
|
|
£39.99
More Information
Visit Store
|
